A series of aluminium profiles and parts for single or double-sided lighting frames with a depth of 45 mm. The EdgeLight45 lighting system allows for the quick and easy changing of advertising sheets.
Features
The specially designed acrylic "light plate", available in 8, 10 or 12 mm, forms the frame's light source. This is illuminated from the side by a High Output TL lamp (16 mm). The entire plate is illuminated. The TL lamp is placed in an aluminium lamp container. All the profiles and parts are delivered from stock, mill-finished and natural anodised and upon request with a coloured powder coating.
Assembly/parts
The system consists of a fixed circular profile (137900) within which the light plate and lamp containers are attached using screws. The mitre joints are assembled using corner joints and mitre plates (137930 and 137931). The advertising plates (3-4 mm) are framed with a block-out film, hiding the EVSA and the lamps from sight. This is not necessary with diapositive plates. The advertising plate can be easily slotted in and out by removing the cap profile (137910). Within specific measurements the system can also be used as a double-sided standout light box or signpost. The support inside which this frame is mounted must be sufficiently strong to stand up to the wind's force. The support is preferably made of steel and is optionally available upon request. For applications to awnings an aluminium support profile is available for mounting EdgeLight 45.
Comhan tips
- Detailed assembly instructions are contained in the pdf file below.
- All sections can be delivered cut to size and in the desired finish.
- Standout lightboxes must always be supported with an internal steel cable and wall anchor.